

What bugs me is the buckles. On the threads I've seen on this, there is no comment from Zos about fixing it. I tried contacting them in game through a support request and got a form-letter response on submitting a bug report. Not even acknowledgement of the issue or that I basically wasted 1000 crowns (10 bucks worth of crowns) on something that looks hideous on my female characters (which all but two of my characters are) due to the no-texture-bright-white buckles that don't go with ANY dye.



The outfit... eh... I can't get over the floating shoulder piece... I mean... what?!?!?!?
Morgha_Kul wrote: »A duster should be LONG... and have sleeves. That thing is an abomination.
What is the deal with these one shoulder armor pieces? It looks like your character was too drunk to properly put on their armor and forgot a piece as they stumbled out the door. Nobody in their right mind would armor only one side of their body, unless they were always crab walking into battle.
Nirntrotter wrote: »What is the deal with these one shoulder armor pieces? It looks like your character was too drunk to properly put on their armor and forgot a piece as they stumbled out the door. Nobody in their right mind would armor only one side of their body, unless they were always crab walking into battle.
Ssshh, it's a fantasy game. Some of us like dramatic, asymmetrical armor.
A Duster is a light loose coat that was traditionally full length and used to protect the clothes of the rider while on horseback or very early cars. As the use of the Duster dwindled it went from outside wear to more inside wear, for a time, before being shorted to knee length for use while on motorcycles.
This here is a more modern duster instead of your typical cowboy type. Light cloth/leather coat wtih a rear split for riding... but instead of being properly secured, they used a belt to do the work, for style, which leave the lower end floofy in contrast to the cinched upper half.
From a model design point of view, they left the phantom ass floof on the backside to have it fit better while riding mounts? Can anyone tell me if the real slit works or does the ass still stretch while galloping the lands?
A Duster is a light loose coat that was traditionally full length and used to protect the clothes of the rider while on horseback or very early cars. As the use of the Duster dwindled it went from outside wear to more inside wear, for a time, before being shorted to knee length for use while on motorcycles.
This here is a more modern duster instead of your typical cowboy type. Light cloth/leather coat wtih a rear split for riding... but instead of being properly secured, they used a belt to do the work, for style, which leave the lower end floofy in contrast to the cinched upper half.
From a model design point of view, they left the phantom ass floof on the backside to have it fit better while riding mounts? Can anyone tell me if the real slit works or does the ass still stretch while galloping the lands?
Yes and no. I wouldn't even consider this even a more modern since most of those still fall below the knee to mid-shin based on most of the patterns I have (digital patterns dating back to the late 1800's to as far as 2010). As for the slits (or vents as they're normally called) have a variety of uses. It used to be for less strain on the garment while riding horses, but now they're used more to proportionally drape the length of the fabric around as well as allowing the wearer to move around easier within the garment. So they do work, but fast fashion really doesn't do proportions toward the individual who bought it which is why I often either re-sew, or redo most of what I pick up when I can't make my own.
spartaxoxo wrote: »A Duster is a light loose coat that was traditionally full length and used to protect the clothes of the rider while on horseback or very early cars. As the use of the Duster dwindled it went from outside wear to more inside wear, for a time, before being shorted to knee length for use while on motorcycles.
This here is a more modern duster instead of your typical cowboy type. Light cloth/leather coat wtih a rear split for riding... but instead of being properly secured, they used a belt to do the work, for style, which leave the lower end floofy in contrast to the cinched upper half.
From a model design point of view, they left the phantom ass floof on the backside to have it fit better while riding mounts? Can anyone tell me if the real slit works or does the ass still stretch while galloping the lands?
Yes and no. I wouldn't even consider this even a more modern since most of those still fall below the knee to mid-shin based on most of the patterns I have (digital patterns dating back to the late 1800's to as far as 2010). As for the slits (or vents as they're normally called) have a variety of uses. It used to be for less strain on the garment while riding horses, but now they're used more to proportionally drape the length of the fabric around as well as allowing the wearer to move around easier within the garment. So they do work, but fast fashion really doesn't do proportions toward the individual who bought it which is why I often either re-sew, or redo most of what I pick up when I can't make my own.
The costume looks like it's falling to about the knee in that picture. This is a modern one I saw when I looked for one
And that looks almost right length wise to me.
spartaxoxo wrote: »A Duster is a light loose coat that was traditionally full length and used to protect the clothes of the rider while on horseback or very early cars. As the use of the Duster dwindled it went from outside wear to more inside wear, for a time, before being shorted to knee length for use while on motorcycles.
This here is a more modern duster instead of your typical cowboy type. Light cloth/leather coat wtih a rear split for riding... but instead of being properly secured, they used a belt to do the work, for style, which leave the lower end floofy in contrast to the cinched upper half.
From a model design point of view, they left the phantom ass floof on the backside to have it fit better while riding mounts? Can anyone tell me if the real slit works or does the ass still stretch while galloping the lands?
Yes and no. I wouldn't even consider this even a more modern since most of those still fall below the knee to mid-shin based on most of the patterns I have (digital patterns dating back to the late 1800's to as far as 2010). As for the slits (or vents as they're normally called) have a variety of uses. It used to be for less strain on the garment while riding horses, but now they're used more to proportionally drape the length of the fabric around as well as allowing the wearer to move around easier within the garment. So they do work, but fast fashion really doesn't do proportions toward the individual who bought it which is why I often either re-sew, or redo most of what I pick up when I can't make my own.
The costume looks like it's falling to about the knee in that picture. This is a modern one I saw when I looked for one
And that looks almost right length wise to me.
The front of the one in the game tapers to about an inch or so below the knee, but it really wouldn't be classified as a 'duster' by most conventional patterning, even through looking at extant garments toward more modern fashion. It may 'look' like it is, but sewing a lot of these for over a decade? I know my dusters and the costume ain't it.
spartaxoxo wrote: »spartaxoxo wrote: »A Duster is a light loose coat that was traditionally full length and used to protect the clothes of the rider while on horseback or very early cars. As the use of the Duster dwindled it went from outside wear to more inside wear, for a time, before being shorted to knee length for use while on motorcycles.
This here is a more modern duster instead of your typical cowboy type. Light cloth/leather coat wtih a rear split for riding... but instead of being properly secured, they used a belt to do the work, for style, which leave the lower end floofy in contrast to the cinched upper half.
From a model design point of view, they left the phantom ass floof on the backside to have it fit better while riding mounts? Can anyone tell me if the real slit works or does the ass still stretch while galloping the lands?
Yes and no. I wouldn't even consider this even a more modern since most of those still fall below the knee to mid-shin based on most of the patterns I have (digital patterns dating back to the late 1800's to as far as 2010). As for the slits (or vents as they're normally called) have a variety of uses. It used to be for less strain on the garment while riding horses, but now they're used more to proportionally drape the length of the fabric around as well as allowing the wearer to move around easier within the garment. So they do work, but fast fashion really doesn't do proportions toward the individual who bought it which is why I often either re-sew, or redo most of what I pick up when I can't make my own.
The costume looks like it's falling to about the knee in that picture. This is a modern one I saw when I looked for one
And that looks almost right length wise to me.
The front of the one in the game tapers to about an inch or so below the knee, but it really wouldn't be classified as a 'duster' by most conventional patterning, even through looking at extant garments toward more modern fashion. It may 'look' like it is, but sewing a lot of these for over a decade? I know my dusters and the costume ain't it.
I mean that's pretty close to the one being sold in an actual store in 2021. So it's likely they modeled that duster after newer look than the ones you said you've worked with more often. 🤷♀️
spartaxoxo wrote: »spartaxoxo wrote: »A Duster is a light loose coat that was traditionally full length and used to protect the clothes of the rider while on horseback or very early cars. As the use of the Duster dwindled it went from outside wear to more inside wear, for a time, before being shorted to knee length for use while on motorcycles.
This here is a more modern duster instead of your typical cowboy type. Light cloth/leather coat wtih a rear split for riding... but instead of being properly secured, they used a belt to do the work, for style, which leave the lower end floofy in contrast to the cinched upper half.
From a model design point of view, they left the phantom ass floof on the backside to have it fit better while riding mounts? Can anyone tell me if the real slit works or does the ass still stretch while galloping the lands?
Yes and no. I wouldn't even consider this even a more modern since most of those still fall below the knee to mid-shin based on most of the patterns I have (digital patterns dating back to the late 1800's to as far as 2010). As for the slits (or vents as they're normally called) have a variety of uses. It used to be for less strain on the garment while riding horses, but now they're used more to proportionally drape the length of the fabric around as well as allowing the wearer to move around easier within the garment. So they do work, but fast fashion really doesn't do proportions toward the individual who bought it which is why I often either re-sew, or redo most of what I pick up when I can't make my own.
The costume looks like it's falling to about the knee in that picture. This is a modern one I saw when I looked for one
And that looks almost right length wise to me.
The front of the one in the game tapers to about an inch or so below the knee, but it really wouldn't be classified as a 'duster' by most conventional patterning, even through looking at extant garments toward more modern fashion. It may 'look' like it is, but sewing a lot of these for over a decade? I know my dusters and the costume ain't it.
I mean that's pretty close to the one being sold in an actual store in 2021. So it's likely they modeled that duster after newer look than the ones you said you've worked with more often. 🤷♀️
The parts I circled are where the knees are on the character model in proportion to the feet pieces. Even compared to the ones in 2021, they're not exactly that short. Your close is at least a few inches off.
Edit: Furthermore, a lot of fast fashion tend to 'adopt' the names of things, but aren't actually the thing. Dusters have had this issue since the mid 80's among other articles of clothing due to the blending of concepts (ex: mixing trenchcoats with dusters, which make them a hybrid of the two — not belonging to either one specifically), even in the fabric itself. Especially when you get into natural/synthetic blends which aren't always marketed correctly. The same goes for trench coats, faux furs, leather, to even denim garments. I trust patterns and actual documentation of those garments before I trust fast fashion's 'label' as there's a distinct difference between the two.
spartaxoxo wrote: »spartaxoxo wrote: »spartaxoxo wrote: »A Duster is a light loose coat that was traditionally full length and used to protect the clothes of the rider while on horseback or very early cars. As the use of the Duster dwindled it went from outside wear to more inside wear, for a time, before being shorted to knee length for use while on motorcycles.
This here is a more modern duster instead of your typical cowboy type. Light cloth/leather coat wtih a rear split for riding... but instead of being properly secured, they used a belt to do the work, for style, which leave the lower end floofy in contrast to the cinched upper half.
From a model design point of view, they left the phantom ass floof on the backside to have it fit better while riding mounts? Can anyone tell me if the real slit works or does the ass still stretch while galloping the lands?
Yes and no. I wouldn't even consider this even a more modern since most of those still fall below the knee to mid-shin based on most of the patterns I have (digital patterns dating back to the late 1800's to as far as 2010). As for the slits (or vents as they're normally called) have a variety of uses. It used to be for less strain on the garment while riding horses, but now they're used more to proportionally drape the length of the fabric around as well as allowing the wearer to move around easier within the garment. So they do work, but fast fashion really doesn't do proportions toward the individual who bought it which is why I often either re-sew, or redo most of what I pick up when I can't make my own.
The costume looks like it's falling to about the knee in that picture. This is a modern one I saw when I looked for one
And that looks almost right length wise to me.
The front of the one in the game tapers to about an inch or so below the knee, but it really wouldn't be classified as a 'duster' by most conventional patterning, even through looking at extant garments toward more modern fashion. It may 'look' like it is, but sewing a lot of these for over a decade? I know my dusters and the costume ain't it.
I mean that's pretty close to the one being sold in an actual store in 2021. So it's likely they modeled that duster after newer look than the ones you said you've worked with more often. 🤷♀️
The parts I circled are where the knees are on the character model in proportion to the feet pieces. Even compared to the ones in 2021, they're not exactly that short. Your close is at least a few inches off.
Edit: Furthermore, a lot of fast fashion tend to 'adopt' the names of things, but aren't actually the thing. Dusters have had this issue since the mid 80's among other articles of clothing due to the blending of concepts (ex: mixing trenchcoats with dusters, which make them a hybrid of the two — not belonging to either one specifically), even in the fabric itself. Especially when you get into natural/synthetic blends which aren't always marketed correctly. The same goes for trench coats, faux furs, leather, to even denim garments. I trust patterns and actual documentation of those garments before I trust fast fashion's 'label' as there's a distinct difference between the two.
Just below the knee vs just above the middle of the knee is not a huge difference in length though? Like that's close, it's not like it's enough of a difference for it not to be called that for a fantasy version of the outfit that has to accomodate their technical limitations.
And I personally don't really care about pattern documents. If it's good enough to be sold as a duster in real stores with real happy customers, I think it's good enough to be called one in game.
Just seems really pedantic to refuse to accept commerical listings of a product as an example of the the recreation in a video game. If it's good enough for that cowboy store, it's good enough for me. Your mileage may vary ofc.🤷♀️
spartaxoxo wrote: »spartaxoxo wrote: »spartaxoxo wrote: »A Duster is a light loose coat that was traditionally full length and used to protect the clothes of the rider while on horseback or very early cars. As the use of the Duster dwindled it went from outside wear to more inside wear, for a time, before being shorted to knee length for use while on motorcycles.
This here is a more modern duster instead of your typical cowboy type. Light cloth/leather coat wtih a rear split for riding... but instead of being properly secured, they used a belt to do the work, for style, which leave the lower end floofy in contrast to the cinched upper half.
From a model design point of view, they left the phantom ass floof on the backside to have it fit better while riding mounts? Can anyone tell me if the real slit works or does the ass still stretch while galloping the lands?
Yes and no. I wouldn't even consider this even a more modern since most of those still fall below the knee to mid-shin based on most of the patterns I have (digital patterns dating back to the late 1800's to as far as 2010). As for the slits (or vents as they're normally called) have a variety of uses. It used to be for less strain on the garment while riding horses, but now they're used more to proportionally drape the length of the fabric around as well as allowing the wearer to move around easier within the garment. So they do work, but fast fashion really doesn't do proportions toward the individual who bought it which is why I often either re-sew, or redo most of what I pick up when I can't make my own.
The costume looks like it's falling to about the knee in that picture. This is a modern one I saw when I looked for one
And that looks almost right length wise to me.
The front of the one in the game tapers to about an inch or so below the knee, but it really wouldn't be classified as a 'duster' by most conventional patterning, even through looking at extant garments toward more modern fashion. It may 'look' like it is, but sewing a lot of these for over a decade? I know my dusters and the costume ain't it.
I mean that's pretty close to the one being sold in an actual store in 2021. So it's likely they modeled that duster after newer look than the ones you said you've worked with more often. 🤷♀️
The parts I circled are where the knees are on the character model in proportion to the feet pieces. Even compared to the ones in 2021, they're not exactly that short. Your close is at least a few inches off.
Edit: Furthermore, a lot of fast fashion tend to 'adopt' the names of things, but aren't actually the thing. Dusters have had this issue since the mid 80's among other articles of clothing due to the blending of concepts (ex: mixing trenchcoats with dusters, which make them a hybrid of the two — not belonging to either one specifically), even in the fabric itself. Especially when you get into natural/synthetic blends which aren't always marketed correctly. The same goes for trench coats, faux furs, leather, to even denim garments. I trust patterns and actual documentation of those garments before I trust fast fashion's 'label' as there's a distinct difference between the two.
Just below the knee vs just above the middle of the knee is not a huge difference in length though? Like that's close, it's not like it's enough of a difference for it not to be called that for a fantasy version of the outfit that has to accomodate their technical limitations.
And I personally don't really care about pattern documents. If it's good enough to be sold as a duster in real stores with real happy customers, I think it's good enough to be called one in game.
Just seems really pedantic to refuse to accept commerical listings of a product as an example of the the recreation in a video game. If it's good enough for that cowboy store, it's good enough for me. Your mileage may vary ofc.🤷♀️
It is when using conventional terms though. There's no technical limitations about it when other motifs in the game have fit the duster bill quite well. Mercenary and Xivkyn are a couple of examples. When you're talking about 'fantasy' versions, sure, I mean that can excuse everything I suppose, but it's not a 'duster'.