Maintenance for the week of August 31:
• NA megaservers for maintenance – August 31, 4:00AM EDT (8:00 UTC) - 12:00PM EDT (16:00 UTC)
• EU megaservers for maintenance – August 31, 8:00 UTC (4:00AM EDT) - 16:00 UTC (12:00PM EDT)
• ESO Store and Account System for maintenance – August 31, 4:00AM EDT (8:00 UTC) - 12:00PM EDT (16:00 UTC)
• NA megaservers for maintenance – August 31, 4:00AM EDT (8:00 UTC) - 12:00PM EDT (16:00 UTC)
• EU megaservers for maintenance – August 31, 8:00 UTC (4:00AM EDT) - 16:00 UTC (12:00PM EDT)
• ESO Store and Account System for maintenance – August 31, 4:00AM EDT (8:00 UTC) - 12:00PM EDT (16:00 UTC)
[3D Art] Abnur Tharn - Cartoon!
ZunaRoath
✭✭✭✭
Hey there!
I had to teach my students about how to do cartoonish characters in the organic digital sculpting in ZBrush, so I made one myself while I taught them. Obviously I had to make my choice be an ESO character! So I chose everyone's favourite Imperial, Abnur Tharn! Here's some real time renders.
Hope you like it!
I had to teach my students about how to do cartoonish characters in the organic digital sculpting in ZBrush, so I made one myself while I taught them. Obviously I had to make my choice be an ESO character! So I chose everyone's favourite Imperial, Abnur Tharn! Here's some real time renders.
Hope you like it!
30
-
TheRealPotoroo✭✭✭✭✭
✭This needs to be made into a bobble-head.PC NA, PC EU
"Instead of taking the best of the dolmens (predictable rotation), the best of the geysers (scalability based on number of players), and the best of the dragons (map location and health indicators) and adding them together to make a fun and dynamic world event scenario, they gave us....... harrowstorms." https://forums.elderscrollsonline.com/en/discussion/comment/6850523/#Comment_68505233 -
ZunaRoath✭✭✭✭TheRealPotoroo wrote: »This needs to be made into a bobble-head.
That would be super amazing lmao I will be 3D printing it this weekend and post the results here, but I don't think I can make its head like that...! Hahahah0 -
SkoomaPie✭✭✭If this could bought then I would definitely buy it in a heartbeat.
Looks awesome.Xbox Gt: SkoomaPie1 -
ZunaRoath✭✭✭✭I return to bring you a picture of this same character, printed! I spent some week doing tests and printing him in my Photon S, I did three prints, in different sizes, and ended up painting one of them, so here it is!
Also, if someone wants to print it themselves, I uploaded it here: https://thingiverse.com/thing:4162607
If you do print it, please show me how your result ended up looking!4 -
BoraxFlux✭✭✭✭✭Cool! Downloaded the stl file and started printing it just now, 10 cm height with PLA (type of filament), on an Ultimaker (FDM type of 3D printer). If the print succeeds I'll post a picture tomorrow.
Edited by BoraxFlux on February 15, 2020 9:46PM1 -
BoraxFlux✭✭✭✭✭Still printing, a few hours left. Somewhere within all those supports is the epic little dude. When the print is finished, it will be a break-away-fest with patience and an exacto knife. Hopefully the result can be shown in one piece :P.
3 -
NotaDaedraWorshipper✭✭✭✭✭
✭✭✭✭✭I'd never thought I would say Abnur looks adorable, but he surely does here!TheRealPotoroo wrote: »This needs to be made into a bobble-head.
Oh yes, adorable Abnur Bobblehead. I'd buy that.Edited by NotaDaedraWorshipper on February 17, 2020 5:28AM[Lie] Of course! I don't even worship Daedra!0 -
BoraxFlux✭✭✭✭✭My apologies Abnur, you'll have to wave half a staff, I might fix that with a toothpick.
( A support failure while printing, not an exacto knife mishap)
@ZunaRoath , thanks for the great design! The epic little dude has found it's place next to my computer screen:
Design & 3D printing-files by Kynes Peace / ZunaRoath
Printed with an Ultimaker3, material: Silver-metallic PLA, slicer: Cura.
Height: 10 cm, layerheight 0.1 mm
Bonus pic:
1 -
ZunaRoath✭✭✭✭My apologies Abnur, you'll have to wave half a staff, I might fix that with a toothpick.
( A support failure while printing, not an exacto knife mishap)
@ZunaRoath , thanks for the great design! The epic little dude has found it's place next to my computer screen:
Design & 3D printing-files by Kynes Peace / ZunaRoath
Printed with an Ultimaker3, material: Silver-metallic PLA, slicer: Cura.
Height: 10 cm, layerheight 0.1 mm
Bonus pic:
Amazing! Happy to see someone printing my model, and that it came so nicely! Thanks for sharing it!1 -
ZOS_AdrikothadminThis is awesome! Thanks for sharing your Abnur Tharn art @ZunaRoath and we hope your students enjoyed your lesson.
The Elder Scrolls Online - ZeniMax Online Studios
Forum Rules | Code of Conduct | Terms of Service | Home Page | Help Site2 -
ZunaRoath✭✭✭✭ZOS_Adrikoth wrote: »This is awesome! Thanks for sharing your Abnur Tharn art @ZunaRoath and we hope your students enjoyed your lesson.
Thank you! They definetly seemed to do 0
