Maintenance for the week of November 25:
• [COMPLETE] Xbox: NA and EU megaservers for maintenance – November 27, 6:00AM EST (11:00 UTC) - 9:00AM EST (14:00 UTC)
• [COMPLETE] PlayStation®: NA and EU megaservers for maintenance – November 27, 6:00AM EST (11:00 UTC) - 9:00AM EST (14:00 UTC)
• [COMPLETE] Xbox: NA and EU megaservers for maintenance – November 27, 6:00AM EST (11:00 UTC) - 9:00AM EST (14:00 UTC)
• [COMPLETE] PlayStation®: NA and EU megaservers for maintenance – November 27, 6:00AM EST (11:00 UTC) - 9:00AM EST (14:00 UTC)
CWC quest with flow valves
EridansZc
Soul Shriven
Hey guys.
This is the second time I have tried to make the quest of CWC with the flow valves. I have to align 6 valves to start an "imperfect" to destroy a wall and continue to pursue Gascone. The problem is that I can not do it, even following the instructions.
Thank you very much.
This is the second time I have tried to make the quest of CWC with the flow valves. I have to align 6 valves to start an "imperfect" to destroy a wall and continue to pursue Gascone. The problem is that I can not do it, even following the instructions.
Thank you very much.
1
-
Maryal✭✭✭✭✭
✭Hey guys.
This is the second time I have tried to make the quest of CWC with the flow valves. I have to align 6 valves to start an "imperfect" to destroy a wall and continue to pursue Gascone. The problem is that I can not do it, even following the instructions.
Thank you very much.
turn the first valve until you see the purple'ish steam seeping through the crevices of the section of pipe to your right, then turn the next valve until you see the purple'ish steam seeping through the crevices of the section of pipe to your right, just keep repeating ... when you turn the last valve the 'imperfect' will come to life.Edited by Maryal on 5 November 2017 03:563 -
idk✭✭✭✭✭
✭✭✭✭✭It seems that someone did offer a solution.
I would suggest in the future googling ESO and the name of the quest. There are a number of players that post the solutions,and some even have videos, for most quests. You will usually get your answer faster.0 -
EridansZcSoul ShrivenIt worked, it's perfect. Thank you so much.
I do not play the English version of the game and in addition I searched for a long time without finding help. That's what I usually do.1 -
VaranisArano✭✭✭✭✭
✭✭✭✭✭I see you've got your solution, so I'll just add the hint that got me through. I was stuck, thinking that I needed to stop the steam from flowing or that it had something to do with how many times I turned the valves. Instead, the valves control the direction the steam is going, so you need to turn the valves to direct the steam to where you need it to go to charge the core.2 -
EridansZcSoul ShrivenI was thinking that too but I didn't get if I had to turn the valve one time or not. So i was stuck...
But it's solved !1 -
lolmer✭✭I just ran into this issue as well. I found that if you don't get the steam flowing correctly at the current valve before moving to the next valve, the steam won't flow to the Imperfect even if you set them correctly afterwards. The last valve, no matter how many times you turn it, won't let the steam flow to the Imperfect, though it'll happily flow the wrong direction and out into the air.
You have to use the Reset Switch if you do them in the wrong order and try again.2