3D printed my ESO main character

ZunaRoath · April 2020

Hey! I come with more 3D prints.

I digitally sculpted my ESO main character, took lots of work, but I finally finished him for 3D printing. I do plan to make him game ready, and do a render for cinematics, so that's why I took so long. But I also made him ready to 3D print, and printed him in resin. I also painted him to match the ESO collectors edition statues, the size is about 21 cm aswell, fitting the CE statues too.

Hope you like it!

ZOS_Chiroptera · April 2020

Wow! This is incredible @ZunaRoath! Great job bringing your character to life.

ZunaRoath · April 2020

ZOS_Chiroptera wrote: »

Wow! This is incredible @ZunaRoath! Great job bringing your character to life.

Thank you!!!

BoraxFlux · April 2020

Motivating to see your creations, wish I had that kind of talent for 3D-sculpting, very nicely detailed!

ZunaRoath · April 2020

BoraxFlux wrote: »

Motivating to see your creations, wish I had that kind of talent for 3D-sculpting, very nicely detailed!

Thank you!

Nestor · April 2020

Awesome Work. Very Well Done!!!

It would be so cool, in the future, if a game could output the file needed to do the 3D printing. Or at least give a starting point so that it could be manipulated in another program in order to be printed.

Rye_puff · April 2020

I love all the tiny little details on the face that bring emotion to the sculpture and character. Amazing job

ArchMikem · April 2020

If a Fan can do it on their spare time, I think ZOS could offer a service to have one of our characters created like this as well. If I can purchase a replica statue of Tali'Zorah I would love a statue of my Khajiit.

ZunaRoath · April 2020

Thanks for the comments, guys, really appreciate them!

sudaki_eso · April 2020

May i ask which printer you used? Just curious cause i work with and create PLA 3D prints and was thinking of getting a resin one...This print looks awesome!

ZunaRoath · April 2020

sudaki_eso wrote: »

May i ask which printer you used? Just curious cause i work with and create PLA 3D prints and was thinking of getting a resin one...This print looks awesome!

Thanks! I used an Anycubic Photon S, with their Eco Resin. I am also going to print this same character in PLA in my Ender 3 soon. As for why the Eco Resin, because it is easier to get rid of, it barely smells, and it is easy to remove the supports. Of course in resin you can't print -too- big with this one printer, but I divided this character and put sockets to that I could print him 21 cm tall.

MattDiamonds · April 2020

That is awesome!

Warndihr · July 2020

Fantastic!!!
Do you share your prints somewhere?

ZunaRoath · July 2020

Warndihr wrote: »

Fantastic!!!
Do you share your prints somewhere?

Hello! Thanks! I share my prints over in Thingiverse, but only those I do want to share

https://www.thingiverse.com/kynes_peace/designs